Request a quote
Deck machinery

Winch / Deck Machinery Services.

Mooring and towing winches, anchor windlasses, hose handling, provision, engine room and offshore cranes, davits.

Service line 05Hydraulic · Mechanical · ElectricalReport included
Anchor windlass on the forecastle
Anchor windlass
01What we do

The same hydraulic and mechanical skills that keep deck cranes running apply to the rest of the deck machinery: mooring winches, windlasses, provision cranes, hose handling cranes on tankers, engine room cranes and the davits that launch lifeboats and rescue boats.

The same hydraulic and mechanical skills that keep deck cranes running apply to the rest of the deck machinery: mooring winches, windlasses, provision cranes, hose handling cranes on tankers, engine room cranes and the davits that launch lifeboats and rescue boats.

We service hydraulic and electric drives, brakes, clutches, gearboxes and control stands, replace wires and chains, and test the equipment to the loads and speeds the rules call for. Davit work includes the winch, brake, limit switches and the annual and five-yearly tests.

Offshore cranes with active heave compensation and constant tension systems are handled by the same hydraulic and automation engineers, on supply vessels and platforms as well as on cargo ships.

Mooring winch with red and yellow guards
Mooring winch05

What to send us

  • Equipment type, maker and the drive (hydraulic or electric)
  • Fault description and whether the equipment can still be used safely
  • Due dates of any class or flag tests
  • Port, berth and time available
Describe the job
02Scope

What the service covers.

The work items under this service line, as listed by our engineers.

  • 01
    Mooring WinchHydraulic and electric mooring winches: drives, brakes, clutches, drum bearings, brake holding tests to the rule values.
  • 02
    Towing WinchTug and offshore towing winches: drives, brakes, spooling gear, tension measurement and control.
  • 03
    Anchor WindlassGearboxes, cable lifters, band brakes, clutches and hydraulic or electric drives serviced and tested.
  • 04
    Hose Handling CraneTanker hose handling cranes: hydraulics, slewing, limit switches and load test.
  • 05
    Provision CraneProvision and stores cranes: power units, hoist motors, brakes, wire rope and annual testing.
  • 06
    Engine Room CraneOverhead travelling cranes in engine rooms: hoist, travel drives, brakes, controls and load testing.
  • 07
    Offshore CranePedestal cranes on supply vessels and platforms, including heave compensation and constant tension hydraulics.
  • 08
    Davit SystemsLifeboat, rescue boat and liferaft davits: winches, brakes, limit switches, wires and periodic tests.
  • 09
    Cable Reeling MachineCable reel drives: electric motor, gearbox and brake stripped, rebuilt and run in the workshop before refitting.
On the job

Photos from recent attendances.

Wrapped electric motor with a universal-joint shaft on a pallet
Motor with cardan shaft01
Yellow sheaves with wire rope during a change on a crane
Sheave change02
Two reels of steel wire rope stacked on top of each other
Rope reels03
Short video

A cable reeling machine back together in the workshop.

Motor, gearbox and brake unit reassembled and painted on one frame, with the connections made so it can be run on the workshop floor before it goes back on board.

The same applies to the other small drives on deck: stripped, measured, rebuilt and run before they leave us.

Cable reeling machine
03Typical jobs

Faults we are called for.

  1. 01Mooring winch brake slips at the rendering test: brake lining, drum surface and spring setting renewed and re-tested.
  2. 02Windlass cannot hold the chain: band brake and clutch repaired, gearbox oil and bearings checked.
  3. 03Provision crane hoist motor overheating: motor overhauled, counterbalance valve re-set, wire renewed.
  4. 04Davit winch limit switch failure: switch replaced, brake tested, lowering and hoisting speeds recorded.
04Questions

Asked before the first visit.

Do you perform the mooring winch brake rendering test?

Yes. The brake holding load is set and tested with a calibrated load cell to the value stated in the vessel's documentation, and a record is issued.

Can davit tests be combined with a crane visit?

They usually are. Davit winches, limit switches and brakes are tested on the same attendance as the deck crane work, which saves a separate call-out.

One team, four disciplines

Other service lines

01Marine Crane ServicesDeck crane maintenance, repair, overhaul, load testing and modernisation on board or in our workshop.Explore 02Hydraulic Systems / EngineeringPump, motor, cylinder and valve overhaul, power pack maintenance, hose manufacturing and system troubleshooting.Explore 03Mechanical ServicesGearbox and winch overhaul, bearing and brake work, couplings, shafts and steel structure repair.Explore 04Electrical / AutomationCrane electrical troubleshooting, PLC and control panel work, joysticks, sensors, limit switches and remote controls.Explore 06Spare Parts / Equipment SupplyMarine crane spare parts, hydraulic motors and pumps, valves, electrical components, joysticks, wire ropes, seals and overhaul kits.Explore 07Inspection / Technical SupportTechnical inspection, condition assessment, fault diagnosis, preventive maintenance, consultancy, onboard attendance, commissioning and reports.Explore 08Gearbox ReplacementHoist, luffing and slewing gearboxes removed and replaced on board: rigging, drum removal, alignment, oil fill and load test.Explore 09Slewing Bearing / Rocking TestRocking tests to measure slewing bearing wear, and slewing bearing replacement on deck cranes: readings, removal, preparation, fitting and report.Explore 10Ro-Ro Ramp ServicesRo-Ro ramp hydraulics, cylinders, hinges, drive units and steel structure: inspection, repair, removal and refit at the shipyard or alongside.Explore 11Steering Gear ServicesSteering gear pumps, control valves, spools, rams and seals: fault diagnosis, overhaul and function testing in the steering gear room.Explore 12Component ManufacturingControl blocks, sheaves, rollers and crane heaters made to drawing or from the worn sample, when the original is no longer available or too slow to arrive.Explore
Mooring winch with red and yellow guards
Crane down? Part needed?

Send the crane make, the fault and the port of call.

Our hydraulic, mechanical and electrical engineers reply with what they need to see, a plan for the attendance and an offer for the parts.